AllStar

AllStar

PSR AllStar Node #: 2462

---

To use your cell phone (or a land-line), away from the repeater, do the following:

1) Register as a 'Normal User' account and/or login using your FCC issued call at: https://allstarlink.org/.

2) Once you're logged in to AllStarLink.org, go to your Account Profile.

3) If your e-mail/call has been validated you will see "Your Callsign is Validated"; Make a note of the 10 digit Secure PIN Number Henceforth called 'PIN'.

4) Calling into the node:

   - Use phone (in Speaker mode) to [dial]: (763)230-0000
   - When prompted [dial]: 2462#
   - [dial] 1 (for Node access)
   - [dial] PIN
   - [dial] 2 (for Function Operated Access)
   - You will be dialed in to the Node
   - Bring up the keypad on your phone (if cellular)
   - [dial] *99 to initiate PTT
   - Say what you want and clear w/ your call.
   - [dial] # when done speaking (to release PTT)

Remember to be in a noise-free environment as your mic will pick up more room noise in 'speaker mode' also try an remain 6-12" away from the mic, too close will over-mod and too far will be too hollow.

If willing, try programming the phone number, as a contact, into your mobile. In a dial-string you can add Pause (2 sec) and Wait (wait for you to click to continue dialing). It's been attempted (w/ success) on an iPhone as follows:

Name: PSR AllStar Number: 7632300000,,,2462#;1;XXX,YYY,ZZZZ,,2

Where: , = 2 sec pause

= wait

XXXYYYZZZZ = PIN