Manually Program Anytone-D878: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
Created page with "I'm planning adapt the text below to the Anytone AT-878UV. -KJ7LQP ''http://www.buytwowayradios.com/blog/2016/08/how_to_manually_program_the_baofeng_uv-5r_from_the_keypad.a..." |
No edit summary |
||
| Line 1: | Line 1: | ||
I'm planning adapt the text below to the Anytone AT-878UV. -KJ7LQP |
I'm planning adapt the text below to the Anytone AT-878UV. -KJ7LQP |
||
'''Adding WW7PSR (the PSRG repeater) as a channel in the Anytone AT-878UV via the keypad (programming manually) |
|||
''[[http://www.buytwowayradios.com/blog/2016/08/how_to_manually_program_the_baofeng_uv-5r_from_the_keypad.aspx from BuyTwoWayRadios.com]]'' |
|||
To program repeater 146.960, -0.6 MHz offset, 103.5 Hz CTCSS TX tone, high power level, into Channel #010'''. |
|||
First Thing... charge your battery. Unlike some brands, Baofeng does not pre-charge the battery. |
|||
[[CHIRP]] Programming Software... http://chirp.danplanet.com/projects/chirp/wiki/Download |
|||
The [MENU/SELECT] key is at the upper left corner of the keypad and features a solid green bar. |
|||
[http://miklor.com Miklor] has good info. |
|||
The [EXIT/BACK] key is at the upper right corner of the keypad and features a broken red bar. |
|||
UV-5R Yahoo User-Group... http://groups.yahoo.com/group/baofeng_uv5r |
|||
The ▲ ▼ keys are on the round key between the [MENU] and [EXIT] keys. The ▲ key is marked with a single white line at the top. The ▼ key is marked with a single white line at the bottom. |
|||
'''Programming Manually...''' This is not covered in the owners manual, here’s how. |
|||
* Turn on radio |
|||
* Press [MENU] and then use the ▲ ▼ keys to highlight Settings |
|||
* Press [SELECT] to select Settings |
|||
* Use the ▼ key to highlight 2 Chan Set |
|||
* Press [SELECT] to select 2 Chan Set |
|||
To program repeater 146.960, minus offset, 103.5 Hz tone, low power level, into Channel #010 |
To program repeater 146.960, minus offset, 103.5 Hz tone, low power level, into Channel #010 |
||
| Line 31: | Line 39: | ||
This article is one of many [[:Category: How-to | how-to articles]] on our wiki. |
This article is one of many [[:Category: How-to | how-to articles]] on our wiki. |
||
[[Category: |
[[Category:Anytone]] |
||
[[Category: How-to]] |
[[Category: How-to]] |
||
Revision as of 15:36, 7 March 2020
I'm planning adapt the text below to the Anytone AT-878UV. -KJ7LQP
Adding WW7PSR (the PSRG repeater) as a channel in the Anytone AT-878UV via the keypad (programming manually) To program repeater 146.960, -0.6 MHz offset, 103.5 Hz CTCSS TX tone, high power level, into Channel #010.
The [MENU/SELECT] key is at the upper left corner of the keypad and features a solid green bar. The [EXIT/BACK] key is at the upper right corner of the keypad and features a broken red bar. The ▲ ▼ keys are on the round key between the [MENU] and [EXIT] keys. The ▲ key is marked with a single white line at the top. The ▼ key is marked with a single white line at the bottom.
* Turn on radio * Press [MENU] and then use the ▲ ▼ keys to highlight Settings * Press [SELECT] to select Settings * Use the ▼ key to highlight 2 Chan Set * Press [SELECT] to select 2 Chan Set
To program repeater 146.960, minus offset, 103.5 Hz tone, low power level, into Channel #010
* Turn on radio.
* If in Memory Mode switch to VFO Mode (VFO/MR)
* use VFO "A" only!
* Select 5 KHz Step - (MENU + 1 + MENU) (Use the ▲ ▼ keys for 5K) (MENU + EXIT)
* Enter 146.960 (The receive frequency)
* Press [MENU] + 2 + [MENU] Use the ▲ ▼ keys to select Low Power
* Press [MENU] + [EXIT] To accept and exit
* Press [MENU] + 5 + [MENU] Use the ▲ ▼ keys to select Wide Bandwidth
* Press [MENU] + [EXIT] To accept and exit
* Press [MENU] + 1 + 3 + [MENU] Use the ▲ ▼ keys to select 103.5 Hz Tone
* Press [MENU] + [EXIT] To accept and exit
* Press [MENU] + 2 + 7 + [MENU] Enter 010 or Use the ▲ ▼ keys to select 010
* Press [MENU] + [EXIT] This stores the Receive Frequency
* Radio prompts that REC FREQ has been stored
* Enter 146.360 (The transmit frequency)
* Press [MENU] + 2 + 7 +
[MENU] + [MENU] + [EXIT] Radio prompts that TX FREQ has been stored
* Return to Memory Mode (VFO/MR)
More Information
This article is one of many how-to articles on our wiki.