Baofeng Manual Programming: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
No edit summary |
No edit summary |
||
| Line 6: | Line 6: | ||
To program repeater 146.960, minus offset, 103.5 Hz tone, low power level, into Channel #010 |
To program repeater 146.960, minus offset, 103.5 Hz tone, low power level, into Channel #010 |
||
*Turn on radio. |
* Turn on radio. |
||
*If in Memory Mode switch to VFO Mode (VFO/MR) |
* If in Memory Mode switch to VFO Mode (VFO/MR) |
||
*use VFO "A" only! |
* use VFO "A" only! |
||
*Select 5 KHz Step - (MENU + 1 + MENU) (Use the key for 5K) (MENU + EXIT) |
* Select 5 KHz Step - (MENU + 1 + MENU) (Use the key for 5K) (MENU + EXIT) |
||
*Enter 146.960 The receive frequency |
* Enter 146.960 The receive frequency |
||
*Press [MENU] + 2 + [MENU] Use the key to select Low Power |
* Press [MENU] + 2 + [MENU] Use the key to select Low Power |
||
*Press [MENU] + [EXIT] To accept and exit |
* Press [MENU] + [EXIT] To accept and exit |
||
*Press [MENU] + 5 + [MENU] Use the key to select Wide Bandwidth |
* Press [MENU] + 5 + [MENU] Use the key to select Wide Bandwidth |
||
*Press [MENU] + [EXIT] To accept and exit |
* Press [MENU] + [EXIT] To accept and exit |
||
*Press [MENU] + 1 + 3 + [MENU] Use the key to select 103.5 Hz Tone |
* Press [MENU] + 1 + 3 + [MENU] Use the key to select 103.5 Hz Tone |
||
*Press [MENU] + [EXIT] To accept and exit |
* Press [MENU] + [EXIT] To accept and exit |
||
*Press [MENU] + 2 + 7 + [MENU] Enter 010 or Use the key to select 010 |
* Press [MENU] + 2 + 7 + [MENU] Enter 010 or Use the key to select 010 |
||
*Press [MENU] + [EXIT] This stores the Receive Frequency |
* Press [MENU] + [EXIT] This stores the Receive Frequency |
||
*Radio prompts that REC FREQ has been stored |
* Radio prompts that REC FREQ has been stored |
||
*Enter 146.380 The transmit frequency |
* Enter 146.380 The transmit frequency |
||
*Press [MENU] + 2 + 7 + |
* Press [MENU] + 2 + 7 + |
||
[MENU] + [MENU] + [EXIT] Radio prompts that TX FREQ has been stored |
[MENU] + [MENU] + [EXIT] Radio prompts that TX FREQ has been stored |
||
*Return to Memory Mode (VFO/MR) |
* Return to Memory Mode (VFO/MR) |
||
Revision as of 15:48, 20 March 2017
UV-5R.com
First Thing... charge your battery. Unlike some brands, Baofeng does not pre-charge the battery. Programming Software... http://wouxun.us/Software/Baofeng/UV-5R Setup Files.zip UV-5R Yahoo User-Group... http://groups.yahoo.com/group/baofeng_uv5r Programming Manually... This is not covered in the owners manual, here’s how.
To program repeater 146.960, minus offset, 103.5 Hz tone, low power level, into Channel #010
* Turn on radio.
* If in Memory Mode switch to VFO Mode (VFO/MR)
* use VFO "A" only!
* Select 5 KHz Step - (MENU + 1 + MENU) (Use the key for 5K) (MENU + EXIT)
* Enter 146.960 The receive frequency
* Press [MENU] + 2 + [MENU] Use the key to select Low Power
* Press [MENU] + [EXIT] To accept and exit
* Press [MENU] + 5 + [MENU] Use the key to select Wide Bandwidth
* Press [MENU] + [EXIT] To accept and exit
* Press [MENU] + 1 + 3 + [MENU] Use the key to select 103.5 Hz Tone
* Press [MENU] + [EXIT] To accept and exit
* Press [MENU] + 2 + 7 + [MENU] Enter 010 or Use the key to select 010
* Press [MENU] + [EXIT] This stores the Receive Frequency
* Radio prompts that REC FREQ has been stored
* Enter 146.380 The transmit frequency
* Press [MENU] + 2 + 7 +
[MENU] + [MENU] + [EXIT] Radio prompts that TX FREQ has been stored
* Return to Memory Mode (VFO/MR)