Difference between revisions of "What information do I actually ''program'' into my radio, and why?"
Jump to navigation
Jump to search
Line 4: | Line 4: | ||
* The '''frequency''' the repeater actually transmits on '''(Example: 146.96 MHz)'''. This is also called the repeater's output frequency. | * The '''frequency''' the repeater actually transmits on '''(Example: 146.96 MHz)'''. This is also called the repeater's output frequency. | ||
* The '''offset''' from that frequency, that your radio adds or subtracts to the repeater's output frequency, that your radio will transmit on, so that the repeater will "hear" it '''(Ex: -0.600 MHz)''' | * The '''offset''' from that frequency, that your radio adds or subtracts to the repeater's output frequency, that your radio will transmit on, so that the repeater will "hear" it '''(Ex: -0.600 MHz for 2M and 5 MHz for 440)''' | ||
* The '''sub-audible tone''' that the repeater needs to accept on your signal '''(Ex: 103.5 Hz)'''. This is often referred to as a PL tone (technically a Motorola trademark), though your radio's manual probably calls it "CTCSS" (the generic name). | * The '''sub-audible tone''' that the repeater needs to accept on your signal '''(Ex: 103.5 Hz)'''. This is often referred to as a PL tone (technically a Motorola trademark), though your radio's manual probably calls it "CTCSS" (the generic name). | ||
* The '''output power''' setting you want your radio to use (usually Low Power is best). This setting is not, strictly speaking, a repeater requirement. You need enough power to be heard clearly, but you should keep it as low as practical. | * The '''output power''' setting you want your radio to use (usually Low Power is best). This setting is not, strictly speaking, a repeater requirement. You need enough power to be heard clearly, but you should keep it as low as practical. |
Revision as of 10:20, 2 April 2017
So, you have your first radio. Congratulations! But now, how to get on the air?
Most likely you'll be starting with repeaters. Here are 4 the basic things you need to program into your radio in order to get on a repeater:
- The frequency the repeater actually transmits on (Example: 146.96 MHz). This is also called the repeater's output frequency.
- The offset from that frequency, that your radio adds or subtracts to the repeater's output frequency, that your radio will transmit on, so that the repeater will "hear" it (Ex: -0.600 MHz for 2M and 5 MHz for 440)
- The sub-audible tone that the repeater needs to accept on your signal (Ex: 103.5 Hz). This is often referred to as a PL tone (technically a Motorola trademark), though your radio's manual probably calls it "CTCSS" (the generic name).
- The output power setting you want your radio to use (usually Low Power is best). This setting is not, strictly speaking, a repeater requirement. You need enough power to be heard clearly, but you should keep it as low as practical.