Baofeng Manual Programming

From PSRG Wiki
Revision as of 16:46, 20 March 2017 by N6NBN (talk | contribs) (Created page with "UV-5R.com First Thing... charge your battery. Unlike some brands, Baofeng does not pre-charge the battery. Programming Software... http://wouxun.us/Software/Baofeng/UV-5R...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

UV-5R.com

 First Thing... charge your battery. Unlike some brands, Baofeng does not pre-charge the battery.
 Programming Software... http://wouxun.us/Software/Baofeng/UV-5R Setup Files.zip
 UV-5R Yahoo User-Group... http://groups.yahoo.com/group/baofeng_uv5r
 Programming Manually... This is not covered in the owners manual, here’s how.
 To program repeater 146.960, minus offset, 103.5 Hz tone, low power level, into Channel #010
 Turn on radio.
 If in Memory Mode switch to VFO Mode (VFO/MR)
 use VFO "A" only!
 Select 5 KHz Step - (MENU + 1 + MENU) (Use the • – key for 5K) (MENU + EXIT)
 Enter 146.960 The receive frequency
 Press [MENU] + 2 + [MENU] Use the • – key to select Low Power
 Press [MENU] + [EXIT] To accept and exit
 Press [MENU] + 5 + [MENU] Use the • – key to select Wide Bandwidth
 Press [MENU] + [EXIT] To accept and exit
 Press [MENU] + 1 + 3 + [MENU] Use the • – key to select 103.5 Hz Tone
 Press [MENU] + [EXIT] To accept and exit
 Press [MENU] + 2 + 7 + [MENU] Enter 010 or Use the • – key to select 010
 Press [MENU] + [EXIT] This stores the Receive Frequency
 Radio prompts that REC FREQ has been stored
 Enter 146.385 The transmit frequency
 Press [MENU] + 2 + 7 +
 [MENU] + [MENU] + [EXIT] Radio prompts that TX FREQ has been stored
 Return to Memory Mode (VFO/MR)