Difference between revisions of "Baofeng Manual Programming"

From PSRG Wiki
Jump to navigation Jump to search
 
(10 intermediate revisions by 4 users not shown)
Line 1: Line 1:
UV-5R.com
''[[http://www.buytwowayradios.com/blog/2016/08/how_to_manually_program_the_baofeng_uv-5r_from_the_keypad.aspx from BuyTwoWayRadios.com]]''
   First Thing... charge your battery. Unlike some brands, Baofeng does not pre-charge the battery.
   First Thing... charge your battery. Unlike some brands, Baofeng does not pre-charge the battery.
   Programming Software... http://wouxun.us/Software/Baofeng/UV-5R Setup Files.zip
   [[CHIRP]] Programming Software... http://chirp.danplanet.com/projects/chirp/wiki/Download
  [http://miklor.com Miklor] has good info.
   UV-5R Yahoo User-Group... http://groups.yahoo.com/group/baofeng_uv5r
   UV-5R Yahoo User-Group... http://groups.yahoo.com/group/baofeng_uv5r
   '''Programming Manually...''' This is not covered in the owners manual, here’s how.
   '''Programming Manually...''' This is not covered in the owners manual, here’s how.


   To program repeater 146.960, minus offset, 103.5 Hz tone, low power level, into Channel #010
   '''EXAMPLE: Program repeater 146.960, negative 600KHz offset, 103.5 Hz tone, low power level, into Channel #010'''
 
   * Turn on radio.
   * Turn on radio.
   * If in Memory Mode switch to VFO Mode (VFO/MR)
   * If in Memory Mode switch to VFO Mode (VFO/MR)
   * use VFO "A" only!
   * use VFO "A" only!
   * Select 5 KHz Step - (MENU + 1 + MENU) (Use the ▲ ▼ key for 5K) (MENU + EXIT)
   * Select 5 KHz Step - (MENU + 1 + MENU) (Use the ▲ ▼ keys for 5K) (MENU + EXIT)
   * Enter 146.960 The receive frequency
   * Enter 146.960 (The receive frequency)
   * Press [MENU] + 2 + [MENU] Use the • – key to select Low Power
   * Press [MENU] + 2 + [MENU] Use the ▲ ▼ keys to select Low Power
   * Press [MENU] + [EXIT] To accept and exit
   * Press [MENU] + [EXIT] To accept and exit
   * Press [MENU] + 5 + [MENU] Use the • – key to select Wide Bandwidth
   * Press [MENU] + 5 + [MENU] Use the ▲ ▼ keys to select Wide Bandwidth
   * Press [MENU] + [EXIT] To accept and exit
   * Press [MENU] + [EXIT] To accept and exit
   * Press [MENU] + 1 + 3 + [MENU] Use the • – key to select 103.5 Hz Tone
   * Press [MENU] + 1 + 3 + [MENU] Use the ▲ ▼ keys to select 103.5 Hz Tone
   * Press [MENU] + [EXIT] To accept and exit
   * Press [MENU] + [EXIT] To accept and exit
   * Press [MENU] + 2 + 7 + [MENU] Enter 010 or Use the • – key to select 010
   * Press [MENU] + 2 + 7 + [MENU] Enter 010 or Use the ▲ ▼ keys to select 010
   * Press [MENU] + [EXIT] This stores the Receive Frequency
   * Press [MENU] + [EXIT] This stores the Receive Frequency
   * Radio prompts that REC FREQ has been stored
   * Radio prompts that REC FREQ has been stored
   * Enter 146.380 The transmit frequency
   * Enter 146.360 (The transmit frequency)
   * Press [MENU] + 2 + 7 +
   * Press [MENU] + 2 + 7 +
     [MENU] + [MENU] + [EXIT] Radio prompts that TX FREQ has been stored
     [MENU] + [MENU] + [EXIT] Radio prompts that TX FREQ has been stored
   * Return to Memory Mode (VFO/MR)
   * Return to Memory Mode (VFO/MR)
== More Information ==
This article is one of many [[:Category: How-to | how-to articles]] on our wiki.
[[Category:Baofeng]]
[[Category: How-to]]

Latest revision as of 10:57, 4 January 2021

[from BuyTwoWayRadios.com]

 First Thing... charge your battery. Unlike some brands, Baofeng does not pre-charge the battery.
 CHIRP Programming Software... http://chirp.danplanet.com/projects/chirp/wiki/Download
 Miklor has good info.
 UV-5R Yahoo User-Group... http://groups.yahoo.com/group/baofeng_uv5r
 Programming Manually... This is not covered in the owners manual, here’s how.
 EXAMPLE: Program repeater 146.960, negative 600KHz offset, 103.5 Hz tone, low power level, into Channel #010
 * Turn on radio.
 * If in Memory Mode switch to VFO Mode (VFO/MR)
 * use VFO "A" only!
 * Select 5 KHz Step - (MENU + 1 + MENU) (Use the ▲ ▼ keys for 5K) (MENU + EXIT)
 * Enter 146.960 (The receive frequency)
 * Press [MENU] + 2 + [MENU] Use the ▲ ▼ keys to select Low Power
 * Press [MENU] + [EXIT] To accept and exit
 * Press [MENU] + 5 + [MENU] Use the ▲ ▼ keys to select Wide Bandwidth
 * Press [MENU] + [EXIT] To accept and exit
 * Press [MENU] + 1 + 3 + [MENU] Use the ▲ ▼ keys to select 103.5 Hz Tone
 * Press [MENU] + [EXIT] To accept and exit
 * Press [MENU] + 2 + 7 + [MENU] Enter 010 or Use the ▲ ▼ keys to select 010
 * Press [MENU] + [EXIT] This stores the Receive Frequency
 * Radio prompts that REC FREQ has been stored
 * Enter 146.360 (The transmit frequency)
 * Press [MENU] + 2 + 7 +
    [MENU] + [MENU] + [EXIT] Radio prompts that TX FREQ has been stored
 * Return to Memory Mode (VFO/MR)

More Information

This article is one of many how-to articles on our wiki.