Difference between revisions of "Baofeng Manual Programming"
Jump to navigation
Jump to search
(added link to Miklor.) |
|||
Line 1: | Line 1: | ||
''[[http://www.buytwowayradios.com/blog/2016/08/how_to_manually_program_the_baofeng_uv-5r_from_the_keypad.aspx from BuyTwoWayRadios.com]]'' | ''[[http://www.buytwowayradios.com/blog/2016/08/how_to_manually_program_the_baofeng_uv-5r_from_the_keypad.aspx from BuyTwoWayRadios.com]]'' | ||
First Thing... charge your battery. Unlike some brands, Baofeng does not pre-charge the battery. | First Thing... charge your battery. Unlike some brands, Baofeng does not pre-charge the battery. | ||
[[ | [[CHIRP]] Programming Software... http://chirp.danplanet.com/projects/chirp/wiki/Download | ||
[http://miklor.com Miklor] has good info. | |||
UV-5R Yahoo User-Group... http://groups.yahoo.com/group/baofeng_uv5r | UV-5R Yahoo User-Group... http://groups.yahoo.com/group/baofeng_uv5r | ||
'''Programming Manually...''' This is not covered in the owners manual, here’s how. | '''Programming Manually...''' This is not covered in the owners manual, here’s how. |
Revision as of 10:33, 2 September 2017
First Thing... charge your battery. Unlike some brands, Baofeng does not pre-charge the battery. CHIRP Programming Software... http://chirp.danplanet.com/projects/chirp/wiki/Download Miklor has good info. UV-5R Yahoo User-Group... http://groups.yahoo.com/group/baofeng_uv5r Programming Manually... This is not covered in the owners manual, here’s how.
To program repeater 146.960, minus offset, 103.5 Hz tone, low power level, into Channel #010 * Turn on radio. * If in Memory Mode switch to VFO Mode (VFO/MR) * use VFO "A" only! * Select 5 KHz Step - (MENU + 1 + MENU) (Use the ▲ ▼ keys for 5K) (MENU + EXIT) * Enter 146.960 (The receive frequency) * Press [MENU] + 2 + [MENU] Use the ▲ ▼ keys to select Low Power * Press [MENU] + [EXIT] To accept and exit * Press [MENU] + 5 + [MENU] Use the ▲ ▼ keys to select Wide Bandwidth * Press [MENU] + [EXIT] To accept and exit * Press [MENU] + 1 + 3 + [MENU] Use the ▲ ▼ keys to select 103.5 Hz Tone * Press [MENU] + [EXIT] To accept and exit * Press [MENU] + 2 + 7 + [MENU] Enter 010 or Use the ▲ ▼ keys to select 010 * Press [MENU] + [EXIT] This stores the Receive Frequency * Radio prompts that REC FREQ has been stored * Enter 146.360 (The transmit frequency) * Press [MENU] + 2 + 7 + [MENU] + [MENU] + [EXIT] Radio prompts that TX FREQ has been stored * Return to Memory Mode (VFO/MR)
More Information
This article is one of many how-to articles on our wiki.