Difference between revisions of "Baofeng Manual Programming"
Jump to navigation
Jump to search
| Line 6: | Line 6: | ||
To program repeater 146.960, minus offset, 103.5 Hz tone, low power level, into Channel #010 | To program repeater 146.960, minus offset, 103.5 Hz tone, low power level, into Channel #010 | ||
*Turn on radio. | * Turn on radio. | ||
*If in Memory Mode switch to VFO Mode (VFO/MR) | * If in Memory Mode switch to VFO Mode (VFO/MR) | ||
*use VFO "A" only! | * use VFO "A" only! | ||
*Select 5 KHz Step - (MENU + 1 + MENU) (Use the key for 5K) (MENU + EXIT) | * Select 5 KHz Step - (MENU + 1 + MENU) (Use the key for 5K) (MENU + EXIT) | ||
*Enter 146.960 The receive frequency | * Enter 146.960 The receive frequency | ||
*Press [MENU] + 2 + [MENU] Use the key to select Low Power | * Press [MENU] + 2 + [MENU] Use the key to select Low Power | ||
*Press [MENU] + [EXIT] To accept and exit | * Press [MENU] + [EXIT] To accept and exit | ||
*Press [MENU] + 5 + [MENU] Use the key to select Wide Bandwidth | * Press [MENU] + 5 + [MENU] Use the key to select Wide Bandwidth | ||
*Press [MENU] + [EXIT] To accept and exit | * Press [MENU] + [EXIT] To accept and exit | ||
*Press [MENU] + 1 + 3 + [MENU] Use the key to select 103.5 Hz Tone | * Press [MENU] + 1 + 3 + [MENU] Use the key to select 103.5 Hz Tone | ||
*Press [MENU] + [EXIT] To accept and exit | * Press [MENU] + [EXIT] To accept and exit | ||
*Press [MENU] + 2 + 7 + [MENU] Enter 010 or Use the key to select 010 | * Press [MENU] + 2 + 7 + [MENU] Enter 010 or Use the key to select 010 | ||
*Press [MENU] + [EXIT] This stores the Receive Frequency | * Press [MENU] + [EXIT] This stores the Receive Frequency | ||
*Radio prompts that REC FREQ has been stored | * Radio prompts that REC FREQ has been stored | ||
*Enter 146.380 The transmit frequency | * Enter 146.380 The transmit frequency | ||
*Press [MENU] + 2 + 7 + | * Press [MENU] + 2 + 7 + | ||
[MENU] + [MENU] + [EXIT] Radio prompts that TX FREQ has been stored | [MENU] + [MENU] + [EXIT] Radio prompts that TX FREQ has been stored | ||
*Return to Memory Mode (VFO/MR) | * Return to Memory Mode (VFO/MR) | ||
Revision as of 15:48, 20 March 2017
UV-5R.com
First Thing... charge your battery. Unlike some brands, Baofeng does not pre-charge the battery. Programming Software... http://wouxun.us/Software/Baofeng/UV-5R Setup Files.zip UV-5R Yahoo User-Group... http://groups.yahoo.com/group/baofeng_uv5r Programming Manually... This is not covered in the owners manual, here’s how.
To program repeater 146.960, minus offset, 103.5 Hz tone, low power level, into Channel #010
* Turn on radio.
* If in Memory Mode switch to VFO Mode (VFO/MR)
* use VFO "A" only!
* Select 5 KHz Step - (MENU + 1 + MENU) (Use the key for 5K) (MENU + EXIT)
* Enter 146.960 The receive frequency
* Press [MENU] + 2 + [MENU] Use the key to select Low Power
* Press [MENU] + [EXIT] To accept and exit
* Press [MENU] + 5 + [MENU] Use the key to select Wide Bandwidth
* Press [MENU] + [EXIT] To accept and exit
* Press [MENU] + 1 + 3 + [MENU] Use the key to select 103.5 Hz Tone
* Press [MENU] + [EXIT] To accept and exit
* Press [MENU] + 2 + 7 + [MENU] Enter 010 or Use the key to select 010
* Press [MENU] + [EXIT] This stores the Receive Frequency
* Radio prompts that REC FREQ has been stored
* Enter 146.380 The transmit frequency
* Press [MENU] + 2 + 7 +
[MENU] + [MENU] + [EXIT] Radio prompts that TX FREQ has been stored
* Return to Memory Mode (VFO/MR)