Difference between revisions of "Baofeng Manual Programming"

From PSRG Wiki
Jump to navigation Jump to search
(Created page with "UV-5R.com First Thing... charge your battery. Unlike some brands, Baofeng does not pre-charge the battery. Programming Software... http://wouxun.us/Software/Baofeng/UV-5R...")
 
Line 4: Line 4:
   UV-5R Yahoo User-Group... http://groups.yahoo.com/group/baofeng_uv5r
   UV-5R Yahoo User-Group... http://groups.yahoo.com/group/baofeng_uv5r
   '''Programming Manually...''' This is not covered in the owners manual, here’s how.
   '''Programming Manually...''' This is not covered in the owners manual, here’s how.
   To program repeater 146.960, minus offset, 103.5 Hz tone, low power level, into Channel #010
   To program repeater 146.960, minus offset, 103.5 Hz tone, low power level, into Channel #010
   Turn on radio.
   *Turn on radio.
   If in Memory Mode switch to VFO Mode (VFO/MR)
   *If in Memory Mode switch to VFO Mode (VFO/MR)
   use VFO "A" only!
   *use VFO "A" only!
   Select 5 KHz Step - (MENU + 1 + MENU) (Use the • – key for 5K) (MENU + EXIT)
   *Select 5 KHz Step - (MENU + 1 + MENU) (Use the • – key for 5K) (MENU + EXIT)
   Enter 146.960 The receive frequency
   *Enter 146.960 The receive frequency
   Press [MENU] + 2 + [MENU] Use the • – key to select Low Power
   *Press [MENU] + 2 + [MENU] Use the • – key to select Low Power
   Press [MENU] + [EXIT] To accept and exit
   *Press [MENU] + [EXIT] To accept and exit
   Press [MENU] + 5 + [MENU] Use the • – key to select Wide Bandwidth
   *Press [MENU] + 5 + [MENU] Use the • – key to select Wide Bandwidth
   Press [MENU] + [EXIT] To accept and exit
   *Press [MENU] + [EXIT] To accept and exit
   Press [MENU] + 1 + 3 + [MENU] Use the • – key to select 103.5 Hz Tone
   *Press [MENU] + 1 + 3 + [MENU] Use the • – key to select 103.5 Hz Tone
   Press [MENU] + [EXIT] To accept and exit
   *Press [MENU] + [EXIT] To accept and exit
   Press [MENU] + 2 + 7 + [MENU] Enter 010 or Use the • – key to select 010
   *Press [MENU] + 2 + 7 + [MENU] Enter 010 or Use the • – key to select 010
   Press [MENU] + [EXIT] This stores the Receive Frequency
   *Press [MENU] + [EXIT] This stores the Receive Frequency
   Radio prompts that REC FREQ has been stored
   *Radio prompts that REC FREQ has been stored
   Enter 146.385 The transmit frequency
   *Enter 146.380 The transmit frequency
   Press [MENU] + 2 + 7 +
   *Press [MENU] + 2 + 7 +
  [MENU] + [MENU] + [EXIT] Radio prompts that TX FREQ has been stored
    [MENU] + [MENU] + [EXIT] Radio prompts that TX FREQ has been stored
   Return to Memory Mode (VFO/MR)
   *Return to Memory Mode (VFO/MR)

Revision as of 15:47, 20 March 2017

UV-5R.com

 First Thing... charge your battery. Unlike some brands, Baofeng does not pre-charge the battery.
 Programming Software... http://wouxun.us/Software/Baofeng/UV-5R Setup Files.zip
 UV-5R Yahoo User-Group... http://groups.yahoo.com/group/baofeng_uv5r
 Programming Manually... This is not covered in the owners manual, here’s how.
 To program repeater 146.960, minus offset, 103.5 Hz tone, low power level, into Channel #010
 *Turn on radio.
 *If in Memory Mode switch to VFO Mode (VFO/MR)
 *use VFO "A" only!
 *Select 5 KHz Step - (MENU + 1 + MENU) (Use the • – key for 5K) (MENU + EXIT)
 *Enter 146.960 The receive frequency
 *Press [MENU] + 2 + [MENU] Use the • – key to select Low Power
 *Press [MENU] + [EXIT] To accept and exit
 *Press [MENU] + 5 + [MENU] Use the • – key to select Wide Bandwidth
 *Press [MENU] + [EXIT] To accept and exit
 *Press [MENU] + 1 + 3 + [MENU] Use the • – key to select 103.5 Hz Tone
 *Press [MENU] + [EXIT] To accept and exit
 *Press [MENU] + 2 + 7 + [MENU] Enter 010 or Use the • – key to select 010
 *Press [MENU] + [EXIT] This stores the Receive Frequency
 *Radio prompts that REC FREQ has been stored
 *Enter 146.380 The transmit frequency
 *Press [MENU] + 2 + 7 +
    [MENU] + [MENU] + [EXIT] Radio prompts that TX FREQ has been stored
 *Return to Memory Mode (VFO/MR)