Difference between revisions of "Baofeng Manual Programming"
Jump to navigation
Jump to search
m (adding category) |
|||
| (5 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
''[[http://www.buytwowayradios.com/blog/2016/08/how_to_manually_program_the_baofeng_uv-5r_from_the_keypad.aspx from BuyTwoWayRadios.com]]'' | |||
First Thing... charge your battery. Unlike some brands, Baofeng does not pre-charge the battery. | First Thing... charge your battery. Unlike some brands, Baofeng does not pre-charge the battery. | ||
Programming Software... http:// | [[CHIRP]] Programming Software... http://chirp.danplanet.com/projects/chirp/wiki/Download | ||
[http://miklor.com Miklor] has good info. | |||
UV-5R Yahoo User-Group... http://groups.yahoo.com/group/baofeng_uv5r | UV-5R Yahoo User-Group... http://groups.yahoo.com/group/baofeng_uv5r | ||
'''Programming Manually...''' This is not covered in the owners manual, here’s how. | '''Programming Manually...''' This is not covered in the owners manual, here’s how. | ||
'''EXAMPLE: Program repeater 146.960, negative 600KHz offset, 103.5 Hz tone, low power level, into Channel #010''' | |||
* Turn on radio. | * Turn on radio. | ||
* If in Memory Mode switch to VFO Mode (VFO/MR) | * If in Memory Mode switch to VFO Mode (VFO/MR) | ||
| Line 20: | Line 22: | ||
* Press [MENU] + [EXIT] This stores the Receive Frequency | * Press [MENU] + [EXIT] This stores the Receive Frequency | ||
* Radio prompts that REC FREQ has been stored | * Radio prompts that REC FREQ has been stored | ||
* Enter 146. | * Enter 146.360 (The transmit frequency) | ||
* Press [MENU] + 2 + 7 + | * Press [MENU] + 2 + 7 + | ||
[MENU] + [MENU] + [EXIT] Radio prompts that TX FREQ has been stored | [MENU] + [MENU] + [EXIT] Radio prompts that TX FREQ has been stored | ||
* Return to Memory Mode (VFO/MR) | * Return to Memory Mode (VFO/MR) | ||
== More Information == | |||
This article is one of many [[:Category: How-to | how-to articles]] on our wiki. | |||
[[Category:Baofeng]] | [[Category:Baofeng]] | ||
[[Category: How-to]] | |||
Latest revision as of 09:57, 4 January 2021
First Thing... charge your battery. Unlike some brands, Baofeng does not pre-charge the battery. CHIRP Programming Software... http://chirp.danplanet.com/projects/chirp/wiki/Download Miklor has good info. UV-5R Yahoo User-Group... http://groups.yahoo.com/group/baofeng_uv5r Programming Manually... This is not covered in the owners manual, here’s how.
EXAMPLE: Program repeater 146.960, negative 600KHz offset, 103.5 Hz tone, low power level, into Channel #010
* Turn on radio.
* If in Memory Mode switch to VFO Mode (VFO/MR)
* use VFO "A" only!
* Select 5 KHz Step - (MENU + 1 + MENU) (Use the ▲ ▼ keys for 5K) (MENU + EXIT)
* Enter 146.960 (The receive frequency)
* Press [MENU] + 2 + [MENU] Use the ▲ ▼ keys to select Low Power
* Press [MENU] + [EXIT] To accept and exit
* Press [MENU] + 5 + [MENU] Use the ▲ ▼ keys to select Wide Bandwidth
* Press [MENU] + [EXIT] To accept and exit
* Press [MENU] + 1 + 3 + [MENU] Use the ▲ ▼ keys to select 103.5 Hz Tone
* Press [MENU] + [EXIT] To accept and exit
* Press [MENU] + 2 + 7 + [MENU] Enter 010 or Use the ▲ ▼ keys to select 010
* Press [MENU] + [EXIT] This stores the Receive Frequency
* Radio prompts that REC FREQ has been stored
* Enter 146.360 (The transmit frequency)
* Press [MENU] + 2 + 7 +
[MENU] + [MENU] + [EXIT] Radio prompts that TX FREQ has been stored
* Return to Memory Mode (VFO/MR)
More Information
This article is one of many how-to articles on our wiki.